Drive Belt Removal, Installation, and Inspection (1.5 L Engine): Inspection

Drive Belt - Inspect

Courtesy of HONDA, U.S.A., INC.

1. Inspect the belt for cracks or damage. If the belt is cracked or damaged, replace it.

2. Check the position of the drive belt auto-tensioner indicator pointer (A) is within the standard range (B) as shown. If it is out of the standard range, replace the drive belt.

Maintenance Minder - Reset (With Maintenance Minder System)

1. If the Maintenance Minder required to inspect the drive belt, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").