Drive Belt Removal, Installation, and Inspection (2.4 L Engine) (2017 2018 2019): Inspection

Drive Belt - Inspect

Courtesy of HONDA, U.S.A., INC.

1. Inspect the belt for cracks or damage. If the belt is cracked or damaged, replace it.

2. Check the position of the drive belt auto-tensioner indicator's pointer (A) is within the standard range (B) as shown. If it is out of the standard range, replace the drive belt.

NOTE: When replaced a new drive belt, check the position of the drive belt auto-tensioner indicator's pointer is within the standard range (C) as shown.

Maintenance Minder - Reset (With Maintenance Minder System)

1. If the Maintenance Minder required to replace the drive belt, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").