Real Time AWD System Symptom Troubleshooting - AWD system indicator does not come on (AWD)

AWD system indicator does not come on 

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   Does the AWD system indicator come on?

   YES 

   Intermittent failure, the system is OK at this time.

   NO 

   The failure is duplicated. Go to step 2.

2. Gauge control module operation check

   -1. Do the gauge control module self-diagnostic function .

   Does the AWD system indicator blinkΩ

   YES 

   Go to step 3.

   NO 

   Replace the gauge control module .

3. AWD control unit check

   -1. Turn the vehicle to the OFF (LOCK) mode.

   -2. Remove the following fuse.

   Fuse	No. A20 (20 A)
   Location	Under-dash fuse/relay box

   -3. Turn the vehicle to the ON mode.

   Does the AWD system indicator come on?

   YES 

   Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good AWD control unit .

   NO 

   Replace the gauge control module .