Conditions for Data Rejection

Even if the system is normal, calibration or deflation detection is not performed during the following conditions.

• The brake pedal is pressed.
• The vehicle is stopping.
• While going slower than 28 mph (45 km/h) or cruising over 65 mph (105 km/h).
• Short turn, rapid acceleration, hard braking.
• Conditions where the right and left wheels are rotating at different speeds like when driving on sand, loose gravel, snow, ice or extremely rough roads.
• When the ABS, EBD, TCS, or VSA controls are operating.
• Gentle cornering radius.
• Driving on a steep slope.