Engine does not start with the immobilizer key

Engine does not start with the immobilizer key 

NOTE:  Before troubleshooting, check the items listed in General Check before Troubleshooting .

1. Problem verification

   -1. Try to start the engine.

   Does the engine start?

   YES 

   Intermittent failure, the vehicle is OK at this time.

   NO 

   Go to step 2.

2. Immobilizer system check

   -1. Turn the vehicle to the OFF (LOCK) mode.

   -2. Turn the vehicle to the ON mode, and check the security indicator.

   Does the indicator off?

   YES 

   Go to step 3.

   NO 

   Go to the security indicator blinks troubleshooting .

3. Starting system check

   -1. Turn the vehicle to the START mode.

   Does the starter motor run?

   YES 

   Go to step 4.

   NO 

   Go to starting system, and check the starter motor .

4. PGM-FI system check 1

   -1. Try to start the engine with the immobilizer key.

   Does the engine start?

   YES 

   Go to step 5.

   NO 

   Go to the PGM-FI system symptom troubleshooting .

5. PGM-FI system check 2

   -1. Wait for a few minutes with the engine running.

   Does the engine stop?

   YES 

   Go to the PGM-FI system symptom troubleshooting .

   NO 

   The system is OK at this time.