LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> LANEWATCH System - Testing & Troubleshooting (Except Hybrid) >> Symptom Troubleshooting >> Blind Spot Information (BSI) System Symptom Troubleshooting >> The buzzer does not sound

The buzzer does not sound

  1. DTC check

    -1. Turn the vehicle to the ON mode.

    -2. Check for DTCs with the HDS.

    DTC Description DTC
       
    DTC Description DTC
       

    DTC (BSI)

    Are any DTCs indicated?

    YES 

    Go to the indicated DTC troubleshooting .

    NO 

    Go to step 2.

  2. Vehicle settings check

    -1. Check the BSI system is ON status, and make sure the BSI system customizing operation.

    Is the BSI system ON?

    YES 

    Go to step 3.

    NO 

    Cancel the OFF status by operating the BSI customization.

  3. Gauge control module check

    -1. Do the gauge control module self-diagnostic function .

    Does the buzzer sound?

    YES 

    Replace the appropriate BSI radar unit .

    NO 

    Replace the gauge control module .