Adaptive Cruise Control (ACC) Symptom Troubleshooting - ACC activation indicator (on the MID) does not go off

ACC activation indicator (on the MID) does not go off 

1. Gauge control module operation check

   -1. Do the gauge control module self-diagnostic function .

   Is the gauge control module OK?

   YES 

   Go to step 2.

   NO 

   Replace the gauge control module .

2. ACC combination switch check

   -1. Turn the vehicle to the OFF (LOCK) mode.

   -2. Test the ACC combination switch .

   Is the switch OK?

   YES 

   Repair a short to ground in the CRUISE GND wire between the ACC combination switch and the gauge control module.

   NO 

   Replace the ACC combination switch .