DTC U3000-51 (Millimeter Wave Radar)

DTC U3000-51  : Millimeter Wave Radar Update Incomplete

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• This DTC is indicated when a millimeter wave radar update is not completed properly.
• This DTC is not deleted until the millimeter wave radar is updated.
• After the update is successfully completed, these DTCs are automatically deleted without using the HDS.
• The functions of the integrated driver support system that will be temporarily canceled when this DTC is recorded can be confirmed with the DTC troubleshooting index .

DTC (IDAS)

1. Millimeter wave radar (update)

   -1. Update the millimeter wave radar .

   NOTE:  When updating control units, use the most current version of the HDS software and interface device. Check any official service information website for more information about updating control units.

   -2. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-51 Millimeter Wave Radar Update Incomplete

   Is DTC U3000-51 indicated?

   YES 

   The failure is duplicated. Replace the millimeter wave radar .

   NO 

   Update is complete.