DTC C1C00-F0, U0401-68, U0402-68
DTC C1C00-F0 : APP Sensor Signal Failure
DTC U0401-68 : PCM (PGM-FI System) Malfunction
DTC U0402-68 : PCM/TCM Malfunction
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- This DTC is recorded when the millimeter wave radar receives failure information for the PCM via the F-CAN.
- If a DTC is recorded again after it is cleared with the HDS, perform a troubleshooting for the PGM-FI system .
- The functions of the integrated driver support system that will be temporarily canceled when this DTC is recorded can be confirmed with the DTC troubleshooting index .
| DTC Description | DTC |
|---|---|
| C1C00-F0 APP Sensor Signal Failure | |
| U0401-68 PCM (PGM-FI System) Malfunction | |
| U0402-68 PCM/TCM Malfunction |
DTC (IDAS)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode, then wait for at least 6 seconds.
-5. Check for DTCs with the HDS.
DTC Description DTC C1C00-F0 APP Sensor Signal Failure U0401-68 PCM (PGM-FI System) Malfunction U0402-68 PCM/TCM Malfunction Is DTC C1C00-F0, U0401-68, or U0402-68 indicated?
YES
The failure is duplicated. Go to the indicated DTC's troubleshooting in the PGM-FI system .
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .