DTC B2375

DTC B2375  : Rain Sensing malfunction

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Body Control Module)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   B2375 Rain Sensing malfunction

   Is DTC B2375 indicated?

   YES 

   Go to step 2.

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.

2. Connector check

   -1. Check for loose or poor connections at the automatic lighting/rain sensor 5P connector.

   Is the connection OK?

   YES 

   Go to step 3.

   NO 

   Reconnect or repair the connector.

3. Rain sensor visual check

   -1. Remove the automatic lighting/rain sensor .

   -2. Check for dirt and dust on the surface of the automatic lighting/rain sensor.

   Is it dirty?

   YES 

   Clean the rain sensor, and then recheck the system.

   NO 

   Go to step 4.

4. Windshield glass visual check: Is it dirty or damaged?

   YES 

   Clean the windshield and, if necessary, repair or replace the windshield glass.

   NO 

   Replace the automatic lighting/rain sensor .