DTC P26C3 (A/T)

DTC P26C3  : Internal SBW Shifter Control Module Performance

NOTE:  Before you troubleshoot, review the General Troubleshooting Information .

DTC (A/T)

1. DTC check

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   U0103 F-CAN A Malfunction (TCM - SBW Shifter Control Module)
   U0291 F-CAN B Malfunction (TCM - SBW Shifter Control Module)

   Is DTC U0103 or U0291 indicated?

   YES 

   Go to the indicated DTC's troubleshooting.

   NO 

   Go to step 2.

2. Problem verification

   -1. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P26C3 Internal SBW Shifter Control Module Performance

   Is DTC P26C3 indicated?

   YES 

   The failure is duplicated. Faulty SBW shifter control module. Replace the SBW shifter assembly .

   NO 

   Intermittent failure, the system is OK at this time. Check for poor connections and loose terminals between the SBW shifter control module and the TCM. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.