DTC: U3003-17, U3006-17 (Adaptive Damper Control Unit)

DTC U3003-17  : Adaptive Damper Control Unit +B Voltage High Failure DTC U3006-17  : Adaptive Damper Control Unit IG (+B) Voltage High Failure

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• This DTC detected when connecting the high voltage battery (24 V) to the vehicle.
• Troubleshoot any PGM-FI system DTCs first .

DTC (Adaptive Damper System)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   -4. Wait for 30 seconds or more.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3003-17 Adaptive Damper Control Unit +B Voltage High Failure
   U3006-17 Adaptive Damper Control Unit IG (+B) Voltage High Failure

   Is DTC U3003-17 and/or U3006-17 indicated?

   YES 

   The failure is duplicated. Replace the adaptive damper control unit .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .