DTC: U3000-55 (Adaptive Damper Control Unit)

DTC U3000-55  : Adaptive Damper Control Unit Internal Circuit Malfunction

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC (Adaptive Damper System)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-55 Adaptive Damper Control Unit Internal Circuit Malfunction

   Is DTC U3000-55 indicated?

   YES 

   Check for loose terminals and poor connections in the adaptive damper control unit 24P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the adaptive damper control unit .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .