DTC: U3000-51 (Adaptive Damper Control Unit)

DTC U3000-51  : Adaptive Damper Control Unit Software Update Failure

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC (Adaptive Damper System)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-51 Adaptive Damper Control Unit Software Update Failure

   Is DTC U3000-51 indicated?

   YES 

   The failure is duplicated. Go to step 2.

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .

2. Adaptive damper control unit check (update)

   -1. Update the adaptive damper control unit if it does not have the latest software .

   -2. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-51 Adaptive Damper Control Unit Software Update Failure

   Is DTC U3000-51 indicated?

   YES 

   Replace the adaptive damper control unit .

   NO 

   Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTCs troubleshooting.