DTC: U3000-49 (Adaptive Damper Control Unit)

DTC U3000-49  : Adaptive Damper Control Unit Internal Circuit Malfunction

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC (Adaptive Damper System)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then wait for 90 seconds or more.

   -4. Turn the vehicle to the ON mode, then wait for 60 seconds or more.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-49 Adaptive Damper Control Unit Internal Circuit Malfunction

   Is DTC U3000-49 indicated?

   YES 

   The failure is duplicated. Replace the adaptive damper control unit .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .