DTC B2636-95

DTC B2636-95  : Abnormality in Installed Sensors Condition

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Parking and Back-Up Sensor Control Unit)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   B2636-95 Abnormality in installed sensors condition

   Is DTC B2636-95 indicated?

   YES 

   Refer to Parts Catalogue and replace the part with an appropriate part according to the detected DTC (s).

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.