LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2020 >> Insight Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Multipurpose Camera Unit - Troubleshooting (Except Hybrid)) >> DTC Troubleshooting >> DTC U3000-51

DTC U3000-51

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Acura RLX, 2019 Acura RLX, 2018 Acura RLX, 2017 Acura RLX, and 2016 Acura RLX. However, it is still accessible from the selected car via links, so may be relevant.

DTC U3000-51  : Multipurpose Camera Unit Update Incomplete

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC Description DTC Freeze Frame
U3000-51 Multipurpose Camera Unit Update Incomplete    

DTC (IDAS)

  1. Multipurpose camera unit check (update)

    -1. Update the multipurpose camera unit if it does not have the latest software .

    -2. Turn the vehicle to the OFF (LOCK) mode.

    -3. Turn the vehicle to the ON mode, then wait for at least 5 seconds.

    -4. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    U3000-51 Multipurpose Camera Unit Update Incomplete    

    Is DTC U3000-51 indicated?

    YES 

    Check for loose terminals in the multipurpose camera unit 20P connector. If the multipurpose camera unit was updated and the symptom/indication is still present, replace the multipurpose camera unit .

    NO 

    Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.