DTC U3000-51 (CAN Gateway)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Acura RLX, 2019 Acura RLX, 2018 Acura RLX, 2017 Acura RLX, and 2016 Acura RLX. However, it is still accessible from the selected car via links, so may be relevant.
DTC U3000-51 : CAN Gateway Programming Error
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information .
| DTC Description | DTC |
|---|---|
| U3000-51 CAN Gateway Programming Error |
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode.
-5. Check for DTCs with the HDS.
DTC Description DTC U3000-51 CAN Gateway Programming Error Is DTC U3000-51 indicated?
YES
NO
Intermittent failure, the system is OK at this time.