LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2020 >> Insight Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Electric Parking Brake - Diagnostics (Except Hybrid)) >> DTC Troubleshooting >> DTC C1110-96, C1111-96

DTC C1110-96, C1111-96

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Acura RLX, 2019 Acura RLX, 2018 Acura RLX, 2017 Acura RLX, and 2016 Acura RLX. However, it is still accessible from the selected car via links, so may be relevant.

DTC C1110-96  : Left-Rear Electric Parking Brake Actuator Malfunction DTC C1111-96  : Right-Rear Electric Parking Brake Actuator Malfunction

DTC Description DTC
C1110-96 Left-Rear Electric Parking Brake Actuator Malfunction  
C1111-96 Right-Rear Electric Parking Brake Actuator Malfunction  

DTC (Electric parking brake)

  1. Problem verification

    -1. Turn the vehicle to the ON mode.

    -2. Clear the DTC with the HDS.

    -3. Turn the vehicle to the OFF (LOCK) mode, then the ON mode.

    -4. Pull the electric parking brake switch to apply the parking brake, then press the brake pedal and push the electric parking brake switch to release the parking brake.

    -5. Check for DTCs with the HDS.

    DTC Description DTC
    C1110-96 Left-Rear Electric Parking Brake Actuator Malfunction  
    C1111-96 Right-Rear Electric Parking Brake Actuator Malfunction  

    Is DTC C1110-96 or C1111-96 indicated?

    YES 

    The failure is duplicated. Go to step 2.

    NO 

    Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .

  2. Rear brake component parts check (brake caliper, brake pad, brake disc, and electric parking brake actuator)

    -1. Turn the vehicle to the OFF (LOCK) mode.

    -2. Check that the appropriate rear brake component parts are properly mounted.

    Is the rear brake component parts installation OK?

    YES 

    Replace the appropriate electric parking brake actuator .

    NO 

    Reinstall the rear brake component parts, and recheck its mounting position, then go to step 1.