Seatbelt Procedure After a Collision

WARNING: This page is about a different car, the 2015 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

Inspection

WARNING: All seatbelt components must be inspected and corrected as part of any collision repair. Inspect all seatbelt components as prescribed by Seatbelt Procedure After a Collision . Failure to follow this instruction may result in incorrect operation of the seatbelt system and increase the risk of serious personal injury or death in a crash.

1.

Before installing the new seatbelt assembly, inspect the seatbelt attaching areas for damage and distortion. If the attaching points are damaged and distorted, work the sheet metal back to its original shape and structural integrity.

2.

Install new seatbelt(s) at any seating position(s) where deployment has occurred and the seatbelt(s) were used. Carry out the appropriate Functional Test procedure for all seating positions. Refer to: Functional Test(s) .