Roof Opening Panel: Notes

WARNING: This page is about a different car, the 2015 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

The roof opening panel consists of the following:

Air deflector
Trough assembly
Roof opening panel glass
Roof opening panel motor/module
Roof opening panel shield
Roof opening panel control switch
Roof opening panel drain hoses
Roof opening panel blind

The roof opening panel is an electronically operated glass panel that can be opened, closed or tilted (vent position) by the roof opening panel control switch. Actuating the switch supplies a ground signal to the roof opening panel motor/module. The roof opening panel uses an integrated motor and module that is serviced as an assembly. The roof opening panel has one-touch open and one-touch close features that are activated when the switch is touched on the open, close or vent symbols.

The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system or when the roof opening panel motor, glass, assembly, or air deflector has been removed or replaced for any reason. For additional information, refer to: Power Roof Opening Panel Initialization .