Front Parking Aid Sensor: Removal

WARNING: This page is about a different car, the 2015 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in GENERAL INFORMATION (HYBRID) . Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions .

All sensors

2.

Remove the front bumper cover. REFER to: Front Bumper Cover .

Outer front parking aid sensors

3.

Remove the outer front parking aid sensor.
1. 1.
  
  Disconnect the outer front parking aid sensor electrical connector.
1. 2.
  
  Release the tabs.
1. 3.
  
  Remove the outer front parking aid sensor from the bracket.

Courtesy of FORD MOTOR COMPANY

Inner front parking aid sensors

4.

Remove the screws and position the front bumper cover reinforcement aside.

Courtesy of FORD MOTOR COMPANY

5.

Remove the inner front parking aid sensor.
1. 1.
  
  Disconnect the inner front parking aid sensor electrical connector.
1. 2.
  
  Release the tabs.
1. 3.
  
  Remove the inner front parking aid sensor from the bracket.

Courtesy of FORD MOTOR COMPANY