Selector Control Shaft Oil Seal Replacement

WARNING: This page is about a different car, the 2013 Honda Odyssey, 2012 Honda Odyssey, and 2011 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Driver Handle, 15 x 135L 07749-0010000
Attachment, 22 x 24 mm 07746-001A800

Remove the oil seal from the transmission housing.

Fig 1: Identifying Oil Seal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the oil seal to a depth of 0 - 0.7 mm (0 - 0.03 in) below the transmission housing surface using the driver handle and the 22 x 24 mm attachment.

Fig 2: Installing Oil Seal In Transmission Housing Using Driver Handle And Attachment
Courtesy of AMERICAN HONDA MOTOR CO., INC.