Mainshaft 4th Gear Replacement

WARNING: This page is about a different car, the 2013 Honda Odyssey, 2012 Honda Odyssey, and 2011 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Driver Handle, 40 mm I.D. 07746-0030100

Remove the mainshaft 4th gear (A) with a press. Place a spacer (B) between the press and the mainshaft (C) to prevent damaging the mainshaft.

Fig 1: Removing Mainshaft 4th Gear With Press
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Slide a new mainshaft 4th gear (A) over the mainshaft (B), then press it into place using the 40 mm I.D. driver handle and the press.

Fig 2: Pressing Mainshaft 4th Gear Over Mainshaft
Courtesy of AMERICAN HONDA MOTOR CO., INC.