LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2017 >> Odyssey SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transmission - 5-Speed) >> Shafts and Clutches >> Intermediary Shaft 4th Gear Removal

Intermediary Shaft 4th Gear Removal

WARNING: This page is about a different car, the 2013 Honda Odyssey, 2012 Honda Odyssey, and 2011 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the intermediary shaft 4th gear (A) on press bases (B), and place a spacer (C) between the intermediary shaft (D) and the press to prevent damaging the intermediary shaft.
    Fig 1: Placing Intermediary Shaft 4th Gear On Press Bases
    G06967261Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Support the bottom of the intermediary shaft with one hand, then press the intermediary shaft out of the press-fitted intermediary shaft 4th gear. The intermediary shaft will drop down after pressing it out of the press-fitted gear.
  3. Remove the remaining parts from the intermediary shaft.
scientia non olet · About LEMON Manuals