PCM/TCM Reset
WARNING: This page is about a different car, the 2013 Honda Odyssey, 2012 Honda Odyssey, and 2011 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To reset the PCM/TCM, initialize only the automatic transmission memory stored in the PCM or the TCM.
- Select the A/T system with the HDS.
- Reset the PCM/TCM with the HDS while the engine is stopped.
- Turn the ignition switch to LOCK (0).
- Turn the ignition switch to ON (II), and wait for 30 seconds.
- Turn the ignition switch to LOCK (0), and disconnect the HDS from the DLC.