DTC P16C0: PCM A/T Control System Incomplete Update
WARNING: This page is about a different car, the 2013 Honda Odyssey, 2012 Honda Odyssey, and 2011 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Do not turn the ignition switch to LOCK (0) or ACCESSORY (I) while updating the PCM. If you turn the ignition switch to LOCK (0) or ACCESSORY (I) before completion, the PCM can be damaged.
- Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review General Troubleshooting Information (see GENERAL TROUBLESHOOTING INFORMATION ).
- This code is indicated when PCM updating is incomplete.
- Update the PCM (see PCM UPDATE ).
- Check for Pending or Confirmed DTCs with the HDS.
Is DTC P16C0 indicated?
YES -Replace the PCM (see PCM REPLACEMENT ).
NO -PCM updating is complete.