Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the dashboard or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the passenger's dashboard side lid (see DASHBOARD SIDE LID REMOVAL/INSTALLATION ).
Pull out the passenger's middle panel (A) to detach the clips and to release the hook (B), then remove it.

Fig 1: Identifying Passenger's Middle Panel With Hooks And Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the panel in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hook into place securely.