Center Console Armrest Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

Take care not to scratch the console or the armrest.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the center console rear trim (see CENTER CONSOLE REAR TRIM REMOVAL/INSTALLATION ).
Remove the screws, then remove the console armrest (A).

Fig 1: Identifying Console Armrest
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the armrest in the reverse order of removal.