Immobilizer code is not identified
WARNING: This page is about a different car, the 2012 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
If the immobilizer code is not identified, the immobilizer indicator will quickly flashes once, then blinks until the ignition switch is turned to LOCK (0). When the ignition switch is turned to LOCK (0), the indicator blinks ten times, then goes OFF to show the system is correctly reset.
The state of the immobilizer key registration and the S-NET line can be checked by doing a SYSTEM CHECK (see SYSTEM CHECK ) and STATUS LOG CHECK (see STATUS LOG ) with the HDS.