All Keys are Lost
WARNING: This page is about a different car, the 2012 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
- Prepare all new keys and have the immobilizer PCM code.
- Connect the HDS to the data link connector.
- Turn the ignition switch to ON (II).
- Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SETUP.
- Select Add and Delete keys, then ALL KEYS LOST.
- Do the registration according to the instruction on the HDS screen.
- Check if the engine can be started by all the registered keys and if the door locks operate using the immobilizer key transmitter.