Front Bulkhead Cover Replacement

NOTE:

Take care not to scratch the front bumper or the body.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

Remove the clips, then remove the air intake duct (A).

Fig 1: Identifying Air Intake Duct
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the clips, then remove the front bulkhead cover (A).

Fig 2: Identifying Front Bulkhead Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.