DTC U3000-49: CAN Gateway Internal Failure
NOTE: Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2014-15) or How to Troubleshoot the Fuel and Emissions Systems (2017) .
| DTC Description | DTC |
|---|---|
| U3000-49 CAN Gateway Internal Failure |
DTC (CAN GATEWAY)
- Problem verification
-1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
- 3. Turn the vehicle to the OFF (LOCK) mode.
- 4. Turn the vehicle to the ON mode.
- 5. Check for DTCs with the HDS.
DTC Description DTC U3000-49 CAN Gateway Internal Failure Is DTC U3000-49 indicated?
YES
Replace the CAN gateway - Refer to: CAN Gateway Removal and Installation (2014-15) or CAN Gateway Removal and Installation (2017) .
NO
Intermittent failure, the system is OK at this time. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2014-15) or How to Troubleshoot the Fuel and Emissions Systems (2017) .