LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> Rocker Arm Assembly Removal

Rocker Arm Assembly Removal

  1. Remove the cylinder head cover (see CYLINDER HEAD COVER REMOVAL  ).
  2. Loosen the rocker arm adjusting screws (A).
    Fig 1: Identifying Rocker Arm Adjusting Screws
    G05952529Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Unscrew the rocker shaft mounting bolts two turns at a time in sequence shown below.
    Fig 2: Identifying Rocker Shaft Mounting Bolts Loosening Sequence
    G05952530Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the rocker shaft mounting bolts, then remove the rocker arm assembly.
    Fig 3: Identifying Rocker Arm Assembly With Rocker Shaft Mounting Bolts
    G05952531Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals