Passenger's Seat Belt Lower Anchor

NOTE:

If replacing the passenger's seat belt lower anchor after deployment, refer to Component Replacement/Inspection After Deployment (see COMPONENT REPLACEMENT/INSPECTION AFTER DEPLOYMENT ) for a complete list of other parts that must also be replaced.
Put on gloves to protect your hands.
Take care not to tear or damage the seat covers.

Detach the passenger's seat belt anchor plate and the anchor cover from the lower anchor.
Remove the lower anchor bolt (A), then remove the lower anchor (B).

Fig 1: Lower Anchor And Anchor Bolt With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the lower anchor in the reverse order of removal, and note these items:
- Assemble the washers, the collars, and the bushing on the lower anchor bolt as shown.
- Apply medium strength liquid thread lock to the lower anchor bolt before reinstallation.
Lower anchor bolt installation

Fig 2: Identifying Lower Anchor Bolt Installation
Courtesy of AMERICAN HONDA MOTOR CO., INC.