SRS Unit Inputs and Outputs at Connector B (39P)

Fig 1: Identifying SRS Unit Inputs And Outputs At Connector B (39P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

CONNECTOR TERMINALS REFERENCE CHART

Terminal Number

Wire Color

Terminal Name

Description

GRY⁽¹⁾

ODS

Sends and receives communication signal with the ODS unit

LT BLU⁽¹⁾

SS+

Driver's seat position sensor

Not used

GRN⁽¹⁾

FRBC

Front passenger's seat belt buckle switch

Not used

YEL⁽¹⁾

FLBC

Driver's seat belt buckle switch

Not used

BRN⁽¹⁾

RS1+

Power source for the right side impact sensor (first), right side impact sensor (second)

LT GRN⁽¹⁾

RS1-

Ground for the right side impact sensor (first), right side impact sensor (second)

PNK⁽¹⁾

LS1+

Power source for the left side impact sensor (first), left side impact sensor (second)

GRY⁽¹⁾

LS1-

Ground for the left side impact sensor (first), left side impact sensor (second)

Not used

LT BLU⁽¹⁾

LCA1+

Power source for the left side curtain airbag inflator

WHT⁽¹⁾

LCA1-

Ground for the left side curtain airbag inflator

PNK⁽¹⁾

RSA+

Power source for the front passenger's side airbag inflator

LT GRN⁽¹⁾

RSA-

Ground for the front passenger's side airbag inflator

PUR⁽¹⁾

LSA+

Power source for the driver's side airbag inflator

ORN⁽¹⁾

LSA-

Ground for the driver's side airbag inflator

Not used

RED⁽¹⁾

RCA1+

Power source for the right side curtain airbag inflator

YEL⁽¹⁾

RCA1-

Ground for the right side curtain airbag inflator

LT BLU⁽¹⁾

RRP+

Power source for the front passenger's seat belt tensioner

LT GRN⁽¹⁾

RRP-

Ground for the front passenger's seat belt tensioner

PNK⁽¹⁾

LRP+

Power source for the driver's seat belt tensioner

BRN⁽¹⁾

LRP-

Ground for the driver's seat belt tensioner

⁽¹⁾	Wire colors may be substituted in this table.