LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Precautions and Procedures >> Spring-Loaded Lock Connector >> Side Airbag Connector >> Disconnecting

Side Airbag Connector: Disconnecting

To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector, then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector half.

Fig 1: Pulling Spring-Loaded Sleeve
G06952337Courtesy of AMERICAN HONDA MOTOR CO., INC.