LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Precautions and Procedures >> Spring-Loaded Lock Connector >> Front Airbag Connectors >> Disconnecting

Front Airbag Connectors: Disconnecting

To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector, then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector.

Fig 1: Pulling Spring-Loaded Sleeve
G06952335Courtesy of AMERICAN HONDA MOTOR CO., INC.