Engine Restart Conditions After Auto Idle Stop (M/T model)
When any of the following conditions are met, the engine restarts after idle stop.
ENGINE RESTART CONDITIONS
| Engine Restart Conditions | Parameter (HDS) |
|---|---|
| Engine Start Switch Clutch pedal pressed, and the ignition switch to START (III). |
STARTER SWITCH |
| Vehicle Speed Clutch pedal is released at 3 mph (5 km/h) or more. |
|
| Transmission Clutch pedal is pressed, and shifter is moved into a gear. |
NP SWITCH |
| Brake System Pedal is released while decelerating during idle stop. |
BRAKE SWITCH |
| Accelerator Pedal Accelerator pedal is pressed (APP sensor is at least 20%).
NOTE:
To restart, press clutch pedal with shifter in neutral.
|
APP SENSOR |
| Clutch Pedal Clutch pedal is released, and shifter is moved into a gear while decelerating during idle stop. |
|
| IMA System SOC is 37% or less, (battery module SOC indicator shows three segments or less.)
NOTE:
To restart, press clutch pedal with shifter in neutral.
|
SOC |
| Brake Booster Pressure Brake booster pressure is not within 310-350 mmHg at 0 mph (0 km/h). (Threshold depends on vehicle speed and atmospheric pressure.)
NOTE:
To restart, press clutch pedal with shifter in neutral.
|
BRAKE BOOSTER PRESSURE SENSOR (S) A+B |
Climate Control System
|
|