Troubleshooting Circuits at the MCM Connectors

Special Tools Required 

• Digital Multimeter KS-AHM-32-003*
• Backprobe Set 07SAZ-001000A (2)

  * Available through the Honda Tool and Equipment Program 888-424-6857

1. Remove the IPU cover (see IPU COVER REMOVAL/INSTALLATION  ).
2. Remove the PCU lid, the PCU busplate, and the PCU cover (see IPU CASE REMOVAL/INSTALLATION  ).
3. Connect the backprope adapters (A) to the stacking patch cords (B), and connect the cords to a digital multimeter.
   Fig 1: Identifying Backprope Adapters And Stacking Patch Cords Connection To Digital Multimeter

   Courtesy of AMERICAN HONDA MOTOR CO., INC.