LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> General Troubleshooting Information >> How to Use the Self-Diagnostic Function Without the HDS >> Canceling the Self-Diagnostic Function

Canceling the Self-Diagnostic Function

  1. 3. Turn the ignition switch to LOCK (0) to cancel the self-diagnostic function. After completing repair work, run the self-diagnostic function again to make sure that there are no other DTCs.
scientia non olet · About LEMON Manuals