Handling Wires and Harnesses

Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations.
Remove clips carefully; don't damage their locks (A).

Fig 1: Identifying Harness Clips And Locks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
After installing harness clips, make sure the harness doesn't interfere with any moving parts.
Keep wire harnesses away from exhaust components and other hot parts, from sharp edges of brackets and holes, and from exposed screws and bolts.
Seat grommets in their grooves properly (A). Do not leave grommets distorted (B).

Fig 2: Identifying Properly Seated Grommets
Courtesy of AMERICAN HONDA MOTOR CO., INC.