Driver's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

Remove the driver's dashboard undercover (A).
1. Turn the lock knob (B) 90°.
2. Gently pull down the front edge to detach the clips (C, D).
3. Pull away the undercover to release the pin (E) from the hole in the kick panel (F).
  
  Fig 1: Identifying Driver's Dashboard Undercover, Lock Knob, Kick Panel, Clips And Pin
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the undercover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and pin into place securely.