Hatch Lower Stop Replacement

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the hatch or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Detach the hooks (A) with a clip remover, then remove the hatch lower stop (B).

Fig 1: Identifying Hatch Lower Stop And Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the hatch lower stop in the reverse order of removal, and push the hooks into place securely.