Hatch Latch Replacement

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the hatch or the related parts.
If the hatch latch cannot be unlocked by using the hatch outer handle switch, remove the maintenance lid (A) from the hatch lower trim, then unlock the hatch latch by turning the lock lever (B) as shown.

Fig 1: Identifying Hatch Latch And Lock Lever
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Remove the hatch lower trim (see TRIM REMOVAL/INSTALLATION - HATCH AREA ).
Disconnect the hatch latch switch connector (A) and the hatch release actuator connector (B) and detach the connector clip (C), then remove the bolts securing the hatch latch (D) from the hatch.

Fig 2: Hatch Latch Switch Connector And Hatch Release Actuator Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the hatch latch in the reverse order of removal, and note these items:
- Make sure the connectors are plugged in properly.
- Make sure the hatch opens properly and locks securely.