LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Key Registration >> All keys are lost

All keys are lost

  1. Prepare all new keys and have the immobilizer ECM/PCM code.
  2. Connect the HDS to the data link connector (DLC).
  3. Turn the ignition switch to ON (II).
  4. Select IMMOBI from the System Selection Menu, then select IMMOBILIZER SETUP.
  5. Select Add and Delete keys, then All keys lost.
  6. Do the registration according to the instructions on the HDS screen.
  7. Check if the engine can be started using all the registered keys, and check that the door locks operate using the immobilizer key transmitter.
scientia non olet · About LEMON Manuals