Vanity Mirror Light Test/Replacement

Remove the sunvisor (see SUNVISOR REMOVAL/INSTALLATION ).
Disconnect the 2P connector (A) from the sunvisor (B). Vanity Mirror Light: 1.8 W

Fig 1: Identifying Vanity Mirror Light Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between terminals No. 1 and No. 2.
- With the vanity mirror cover (C) opened, there should be continuity.
- With the vanity mirror cover (C) closed, there should be no continuity.
Install the light in the reverse order of removal.