LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Interior Lights >> Cargo Area Light Test/Replacement

Cargo Area Light Test/Replacement

  1. Open the hatch.
  2. Carefully pry out the cargo area light (A).
    Fig 1: Identifying Cargo Area Light Connector Terminals
    G06954023Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 2P connector (B) from the cargo area light.
  4. Check for continuity between the terminals No. 2 (+) and No. 1 (-). There should be continuity. If there is no continuity, check the bulb. If the bulb is OK, replace the cargo area light assembly.
  5. Install the light in the reverse order of removal.
scientia non olet · About LEMON Manuals