LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> HANDSFREELINK System >> General Troubleshooting Information >> Clearing the HFL System

Clearing the HFL System

NOTE:
  • This operation clears the HFL system of all pass code(s), any paired phones, and all names in the HFL phonebook.
  • Clearing the HFL system is recommended before selling the vehicle.
  • If the HFL system is locked and the pass code has been lost or forgotten, see the SYMPTOM TROUBLESHOOTING  .
  1. Press and release the HFL TALK button. After the beep, say "System Setup Clear" and the HFL system responds, "This process will clear all paired phones, clear all entries in the phonebook, clear the security pass code, and restore all defaults in the system setup. Is this what you would like to do?"
  2. Press and release the HFL TALK button. After the beep, say "Yes" and the HFL system responds, "Preparing to clear the system, which may take up to 2 minutes to complete. To proceed, press the talk button, and say "Continue". Otherwise say "Go back" or "Cancel".
  3. Press and release the HFL TALK button. After the beep, say "Continue" to proceed, or say "Go back" or "Cancel".
  4. If you said "Continue," the HFL responds, "Please wait until the system is cleared." After a short period of time (up to two minutes) the HFL responds, "The system has been cleared."
scientia non olet · About LEMON Manuals