Audio unit disc indicator does not work (without navigation)
NOTE:
- Check the vehicle battery condition first (see 12 VOLT BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Audio discs with labels should not be used in the audio unit. They may damage and jam the player mechanism.
- Turn on the audio system.
- Insert a known-good disc or press the EJECT button.
Is the DISC indicator (LED) indicated?
YES -The audio unit is OK at this time. Check for loose or poor connections at the audio unit and the center panel.
NO -Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ). If the symptom is still present, substitute a known-good center panel (see step 9 ), and recheck. If the symptom/indication goes away, replace the original center panel (see step 9 ).